Vertical Mate 85 (Reference-Nr. 090654)

•  
  Reference number 090654

  Manufacture Year 2019

  Operation Hours not applicable

• Vendor

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

• Manufacturer

  DMG MORI

• Control

  Fanuc

• Description

  
  

  General
  CNC Grindingmachine; Control: Fanuc 32iB

• Specification

  
  

  Rotary dresser (with diamond, for O.D./face)	Rotary dresser (with diamond, for O.D./face) Rotary dresser has multiple diamonds, so it has a longer life than a single point dresser. It is not applicable to dress a back face of a wheel. When CBN wheel is used, also selecting Rotary dresser with AE s
  Wheel rear face dresser (combination use with rotary dresser)	Wheel rear face dresser (combination use with rotary dresser) This option helps to dress a rear face of a wheel which cannot be ground with a rotary dresser. Please consider selecting this option when a rotary dresser is selected.
  Clamping fixture for face plate (3 pcs. for clamping, 3 pcs. for centering)	Clamping fixture for face plate (3 pcs. for clamping, 3 pcs. for centering) 3 pcs. of face clamper and 3 pcs. of centering adjuster for face plate. It is suitable for clamping flange shape workpiece or special plate fixture.
  Magnetic block (3 pcs.)	Magnetic block (3 pcs.) Portable magnetic block 1 set for 3 pcs. which have permanent magnet with ON/OFF manual switch. It is possible to mount magnetic block on table at any place. And, the magnet block can be directly hold workpiece. Minimum clamping
  Star-pole round type permanent magnetic chuck (dia. 500/with T-slots/24 magnetic poles)	Star-pole round type permanent magnetic chuck (dia. 500/with T-slots/24 magnetic poles) Round shaped magnetic chuck with manual ON/OFF handle. It has star- pole magnetic lines and T-slots to fix the work rests which reduce adjustment time of the workpie
  Paper filter 80L/min (Secondary coolant separator) (Sumitomo Heavy Industries Finetec:SP-8-1)	Paper filter 80L/min (Secondary coolant separator) (Sumitomo Heavy Industries Finetec:SP-8-1) It is paper filter roll with mesh size of 30µm for collecting non-magnetic materials which cannot be collected by standard filtration with magnetic separator
  Automatic measurement system (for I.D., O.D., face/touch sensor by Renishaw MP250)	Automatic measurement system (for I.D., O.D., face/touch sensor by Renishaw MP250) It is attached next to grinding spindle as a Y axis parallel to Z axis. It is used for measuring internal & external diameters as well as faces and it can provide automa
  Z-axis scale feedback control (0.1µm)	Z-axis scale feedback control (0.1µm)) Magnetic type scale with resolution 0.1µm. Feedback axis position errors to NC and adjust an axis position. Recommended for face grinding, and traverse grinding for taper by 2-axis (X, Z) interpolation.
  Master gauge table (Master gauge is not included.), not available with APC	Master gauge table (Master gauge is not included.), not available with APC Coolant plumbing is equipped in table to improve calibration accuracy for measuring by flowing over gauge and making it the same temperature as workpieces on workspindle. Please
  Master gauge (dia. 190), not available with APC	Master gauge (dia. 190), not available with APC Master gauge is controlled at the same temperature as the workpiece by being supplied the same coolant as room temperature and makes it possible to periodically calibrate probe and correct for any thermal
  Transformer cable (5m)	Transformer cable (5m) This cable runs from a transformer to machine's electrical cabinet.
  Running time/parts count display	Running time/parts count display It shows the total power-on time and the cycle time, as well as the number of ground parts.
  Automatic power-off system	Automatische Maschineabschaltung. Programmierbare Maschineabschaltung. Nach Ablauf und Fertigstellung des letzten Werkstücks wird die Maschine komplett ausgeschaltet.

• State

  Used