Search filter
Search filter
Products
Provider
Category
Manufacturer
Products ()
Categories ()
Merchants ()
Manufacturers ()
TWIN 65 (Reference-Nr. 160126)
Request about this Machine
Asking price
- Reference number 160126Manufacture Year 1999Operation Hours not applicable
-
Vendor
Main Category
Metal working machinesCategory
LathesType of Machine
Turret lathes (Capstan) and turret automaticsManufacturer
DMG MORIControl
SiemensDescription
General Two- Spindle Turning Centre; Control: Sinumerik 840C Tool holder 2 Number of tool stations 12 Shank diametre according to DIN 69880 30 mm Number of driven tools 12 Speed max. -4000 rpm Power max. (100% DC) 5 kW Power max. (40% DC) 6,5 kW Tool holder 1 Number of tool stations 12 Shank diametre according to DIN 69880 30 mm Speed max. -4000 rpm Number of driven tools 12 Power max. (100% DC) 5 kW Power max. (40% DC) 6,5 kW Slide 3 (Spindle 2) Longitudinal stroke 600 mm Rapid traverse Z 30 m/min Feed rate torque (100% DC) in Z 700 daN Slide 2 Longitudinal stroke 555 mm Transverse stroke 190 mm Rapid traverse X 20 m/min Rapid traverse Z 30 m/min Slide 1 Longitudinal stroke 555 mm Transverse stroke 190 mm Y axis, vertical +/- 40 mm Rapid traverse in X 20 m/min Rapid traverse in Z 30 m/min Rapid traverse in Y 7,5 m/min Feed rate torque (100% DC) in X/Y/Z 400/700/700 daN Main drive 2 Type of main drive AC Drive power (100% DC) 14 kW Drive power (40% DC) 18 kW Speed range 31 - 6300 rpm Bench speed 1000 rpm Max. torque (40% DC) 130 Nm C-Axis Speed 250 rpm Torque of C-Axis (holding torque) 120 Nm Input precision of C-axis 0,03 degree Main drive 1 Type of main drive AC Drive power (100% DC) 21 kW Drive power (40% DC) 28 kW Speed range 25 - 5000 rpm Bench speed 850 rpm Max. torque (40% DC) 320 Nm C-Axis Speed 250 rpm Torque of C-Axis (holding torque) 200 Nm Input precision of C-axis 0,03 degree Work spindle (right) Spindle nose Flat flange Diametre of spindle nose 140h5 mm Bar diametre 42 mm Spindle diametre on front bearing 90 mm Work spindle (left) Spindle nose Flat flange Diametre of spindle nose 170h5 mm Bar diametre 65 mm Spindle diametre on front bearing 120 mm Working area Swing diameter over guide ways 240 mm Turning diameter 200 mm Distance between spindles 800 mm Floor space/Weight Dimensions (L x W x H) 4,8 x 2,25 x 1,95 m Weight approx. 6500 Kg Specification
Hollow clamping attachment Ø 65, left hydraulic hollow clamping attachment, inner dia. of draw tube max. Ø66 mm (Ø2.60 in), draw force 45kN (10,116 lbf) at P max. 80 bar (1,160 psi) Partial hollow clamping device, right diameter 45 mm (2.6 in), partially hollow 625 mm deep Chip conveyor Hinged plate slat type chip conveyor Coolant supply through the spdl, sub-spdl coolant supply through the main spindle, for sub spindle Add. high pressure coolant pump, 20 bar additional high-pressure coolant pump, additional 300 l (79 gal) tank, p = 30 l/min at 20 bar (7.9 GPM at 290 PSI) including lifting pump and float switch Adjust. comp. stop in hollow clamp. dev. adjustable component stop, mounted inside the hollow clamping device Oil mist extractor, IFS, IFM (1800 m³/h) oil mist extraction by mechanic industrial filter, IFS, type IFM 1800 m3/h (63570 ft3/h) Parts catcher for bar components part collector for bar components Signal lamp, triple, coloured Signal lamp, triple, coloured Signal lamp mounted above the machine cover on a vertical pipe. Three operating states of the machine are displayed via the control lamp State
Used