Search filter
Search filter
Products
Provider
Category
Manufacturer
Products ()
Categories ()
Merchants ()
Manufacturers ()
GMX 300 linear (Reference-Nr. 190068)
Request about this Machine
Asking price
- Reference number 190068Manufacture Year 2007Operation Hours not applicable
-
Vendor
Main Category
Metal working machinesCategory
LathesType of Machine
Turret lathes (Capstan) and turret automaticsManufacturer
DMG MORIControl
SiemensDescription
Working area Swing diameter over guide ways 640 mm Distance between spindles 1930 mm Technical Data Drive power (100% DC) 13,2 kW Drive power (40% DC) 22 kW Torque (40% DC) 100 Nm Speed range 20-12000 rpm B axis, slide 1 Swivelling range +/- 120 degree Slide 2 Longitudinal stroke 1400 mm Transverse stroke 225 mm Rapid traverse X 24 m/min Rapid traverse Z 40 m/min Slide 1 Transverse stroke 550 mm Longitudinal stroke 1585 mm Y axis, vertical +/- 110 mm Rapid traverse in X 40 m/min Rapid traverse in Z 60 m/min Rapid traverse in Y 24 m/min Main drive 2 Drive power (100% DC) 25 kW Drive power (40% DC) 37 kW Speed range -5000 rpm Bench speed 900 rpm Max. torque (40% DC) 370 Nm C-Axis Speed -5000 rpm Torque of C-Axis (holding torque) 390 Nm Main drive 1 Drive power (100% DC) 25 kW Drive power (40% DC) 35 kW Speed range -5000 rpm Bench speed 900 rpm Max. torque (40% DC) 370 Nm C-Axis Speed -5000 rpm Torque of C-Axis (holding torque) 390 Nm Work spindle (right) Spindle nose Flat flange Diametre of spindle nose 170h5 mm Spindle bore 79 mm Spindle diametre on front bearing 120 mm Spindle capacity 65 mm Work spindle (left) Spindle nose Flat flange Diametre of spindle nose 170h5 mm Spindle bore 79 mm Bar diametre 65 mm Spindle diametre on front bearing 120 mm General Turning-milling centre - partial hollow clamping device - drawtube ID 68 mm - C-axis and spindle brake (hydraulically) - upper compound slide with turning-/ milling spindle, reception HSK-A63, DIN 69893 with 3-fold Hirth-coupling 1°-Indexing to lock the spindle during turning operations - Y-axis - B-axis interpolating with hydraulically locking - tool magazine 1 x 60-fold, shelf magazine with tool changer and handling unit, additional 4 tool loading stations; Control: Sinumerik 840D powerline Floor space/Weight Weight approx. 20000 Kg Dimensions (L x W x H) 9,3 x 4,6 x 3,05 m Specification
Standard equipment 1 - upper compound slide with turning-/ milling spindle, reception HSK-A63, DIN 69893 with 3-fold Hirth-coupling 1°-Indexing to lock the spindle during turning operations - absolut, direct measuring systems in all linear axes Standard equipment 2 - chip conveyor, - cooling pump 8 bar (116 psi); 20 l/min (5.28 gal/min) - V24 and Ethernet-interface Clamping with balanced pressure, main sp. Balanced pressure clamping device for the main spindle Clamping with balanced pressure, sub-sp. Balanced pressure clamping device for sub-spindle Hollow clamping device mainspindle, Ø 68 mm Hollow clamping device at the main spindle (left) boring Ø68 mm (2,67 inch) Lower compound slide w. tool drive a. turret star type turret, 12-fold with tool drive, reception 40 mm (1.575 inch) DIN 69880, radial - Lower compound slide (X2, Z2), AC servo drives with ball screws, absolute, direct measuring system Torque limiters clutches X1-,Ys-,X2-,Z2-,Z3-axis Overload clutches for X1-, Ys-, X2-, Z2-, Z3-axis for machine with subspindle and above slide Subspindle ISM 65 for GMX 300 Linear subspindle for GMX 300 Linear as integrated spindle motor ISM 65 - drive power 25/37 kW (33/49 hp) - partial hollow clamping (hydraulical) - draw tube ID 66 mm (2.6 inch) - C-axis and spindle break (hydraulical) State
Used