UNGERER 180022523

•  
  Reference number 1073-60145

  Manufacture Year 2023

  Operation Hours not applicable

• Vendor

  Frech GmbH
  Werderstrasse 82
  74889 Sinsheim

  Germany

  

• Main Category

  Metal working machines

• Category

  Sheet Metalforming machines

• Type of Machine

  Sheet-straightening machines

• Manufacturer

  UNGERER

• Technical data

  material width

  1650 mm

  material thickness

  2,00 mm

  no. of straightening rolls

  23

  sheet thickness - min.

  0,50 mm

  diam. of the rolls ca.

  53,60 mm

  straight. rolls-needle bearings

  ja / yes

  between stands ca.

  1750 mm

  barrel length ca.

  1820 mm

  straight. speed ca.

  m/ min

  total power requirement

  58 kW

  weight of the machine ca.

  19,60 t

  dimensions of the machine ca.

  6,00 x 3,00 x 2,90 m

• Description

  Number - supports 14 (7 x above/7 x below) with support rollers
  Number - support rollers 174 ( 84 x above / 91 x below)
  Support roller dia. approx. 112mm
  Drive power - main drive 55 kW
  Motorized height adjustment
  Electromotive tipping device
  Crowning (support adjustment (below) mechanical/manual) and individually
  deliverable
  1 set of straightening rollers (replacement rollers) diam. 53.68mm
  Central grease lubrication of the straightening rollers bearing rails
  Circulating oil lubrication of gears and cardan shafts
  Control is missing
  All motors: main drive motor, pan motor, height adjustment motor
  and oil pump are provisionally provided with a connection cable.
  A 24 V transformer is used for the swivel motor and for the height adjustment
  motor
  still needed - this is for the brake.
  1 box of spare rollers
  1 new drive motor 55 kW
  
  
  This ad was created with MODUL MWS - the software solution of LogoTech.

• State

  Used