DMU 40 eVo (Reference-Nr. 040849)

•  
  Reference number 040849

  Manufacture Year 2017

  Operation Hours not applicable

• Vendor

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

  Metal working machines

• Category

  Machining centres

• Type of Machine

  Machining centres (Universal)

• Manufacturer

  DMG MORI

• Control

  Heidenhain

• Description

  
  

  Technical Data
  Feed rate longitudinal/transverse/vertical	50000/50000/50000 mm/min
  Rapid traverse longitudinal/transverse/vertical	50/50/50 m/min
  General
  Universal machining centre New DMG MORI Design; Control: 3D-Control Heidenhain TNC 640
  Working area 1
  Longitudinal	400 mm
  Cross	400 mm
  Vertical	375 mm
  Tool changer
  Type of magazine	Chain
  Type of gripper	Double gripper
  Number of tools	60
  Max. tool weight	6 Kg
  Max. tool length	300 mm
  Max. tool diameter with occupied adjacent pockets	80 mm
  Max. tool dia. with free neighbouring pockets	130 mm
  Floor space/Weight
  Weight approx.	7200 Kg
  Dimensions (L x W x H)	4,7 x 4,7 x 2,48 (4,7 x 5,5 x 2,48) m

• Specification

  
  

  NC swivel rotary table	NC rotary table with swivel axis, incl. cooling of the table
  	Type of Measuring system Direct measuring system
  	Table surface 450 x 400 mm
  	Centre bore 30 mm
  	Maximum load (table centre) 250 Kg
  Spindle speed 20.000 rpm, HSK-A63	Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
  	Rotation Speed 5. Axis 60 rpm
  	5. Axes (swivelling range) -5/+110 degree
  	4. Axes (swivelling range) 360 x 0,001 degree
  	Rotation speed max.4. Axis 60 rpm
  	Distance between T-Slots 63 mm
  	Number of Slots 5
  	Slot width 14 mm
  Chain-type tool magazine 60 pockets	Tool magazine with 60 positions, chain type with double gripper (differently from standard)
  Direct measuring system	Direct path measuring system
  Cabine	Full protection cabin
  Preparation 3D Quickset	Machine preparation for use of the 3D quickSET Toolkit. included is the Softwareoption for 3D quickSET for one machine. 5 axis machine configurations (only with option touch probe)
  Infrared measuring probe TS 649 DMG	Infrared touch probe make Heidenhain TS 649 DMG
  Laser tool measuring, fixed	Laser tool measuring Laserbridge mounted on table console including Calibration tool
  Internal coolant supply 40 bar / 600l	Internal coolant supply (ICS) with paper type filter, 40 bar/23 l/min / 600-l tank 580 psi/6 gallon/min /160 gallon air purge for linear measuring system, bed flushing
  Preparation handling system EROWA	Preparation handling system EROWA interface via M65

• State

  Used