DMC 65 monoBLOCK (Reference-Nr. 020306)

•  
  Reference number 020306

  Manufacture Year 2021

  Operation Hours not applicable

• Vendor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

  Metal working machines

• Category

  Machining centres

• Type of Machine

  Machining centres (Universal)

• Manufacturer

  DMG MORI

• Control

  Siemens

• Description

  
  

  General
  Universal Machining Centre Vertical headstock Tool change system double gripper NC-Swivel rotary table with pallet carrier 3 pallets 500 mm x 500 mm / 19.7 in x 19.7 in T-slots according to DIN 55201-A2 linear pallet changer coolant tank 500 l / 132 gallon chip conveyor with netting band filter integrated, coolant ring jet; Control: CELOS with Siemens 840D sl Operate
  Working area 1
  Longitudinal	735 mm
  Cross	650 mm
  Vertical	560 mm
  Technical Data
  Feed rate longitudinal/transverse/vertical	40000/40000/40000 mm/min
  Rapid traverse longitudinal/transverse/vertical	40/40/40 m/min
  Floor space/Weight
  Weight approx.	18300 Kg

• Specification

  
  

  Direct measuring system	Direct path measuring system
  Cabine	Full protection cabin
  NC swivel rotary table with pallet carrier	Table surface 500 x 500 mm
  	Centre bore 50 mm
  	Maximum load (table centre) 500 Kg
  	Slot width 14 mm
  Motor spindle 20,000 rpm	Motor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)
  	5. Axes (swivelling range) +/- 120 x 0,001 degree
  	4. Axes (swivelling range) 360 x 0,001 degree
  	Distance between T-Slots 100 mm
  	Number of Slots 5
  Tool magazine, chain vert., 180 pockets	Tool magazine Vertical chain magazine with 180 tool pockets
  Spindle taper HSK-A 63	Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle and standard magazine)
  3D quickSET	3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only together with option measuring probe)
  Infrared measuring probe Renishaw	Infrared measuring probe Type Renishaw OMP 60
  Tool measuring in machining area Blum Laser	Tool measuring in machining area Blum Laser DIGILOG Tool length and diameter measurement vertically
  Production package 40 bar/23 l/min, 600 l tank	Production package: Scraper flight conveyor with coolant unit 600 l / 160 gallon, paper band filter Discharge height: 950 mm / 37.4 in Width: 670 mm / 26.4 in Internal coolant supply 40 bar / 23 l/min - 580 psi / 6 gpm through spindle centre (AD) External
  Rotating clear-view window	Rotating clear-view window cabin door
  Sensorpaket i4.0	Sensor package i4.0: MPC Machine Protection Control SGS Spindle Growth Sensor ICS flow sensor
  proTIME	proTIME Visualisation of the remaining runtime, remaining workpieces and the machine state
  Tool identification (TDS)	Tool identification (Tool Dialogue System TDS) Type Balluff, data carrier BIS C-122-04/L Reading writing station at the tool magazine Reading/Writing manually, contactless with chip
  Maintenance Package I4.0	Maintenance Package I4.0: - measurement of tool pull-in force - autom. lubrication of tool clamp - monitoring of pneumatics
  Spray pistol with pump	Spray pistol with pump 2 bar/40 l/min 29 psi/10.4 gallon/min (theoretical pump performance)
  Cooling	Cooling by air blast through spindle centre, selection with M function
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area Release after completed check list
  MDynamics package	Deckel Maho package MDynamics Improved surface quality combined with reduced machining time
  Application Tuning Cycle ATC	Application Tuning Cycle ATC programmable feed parameter selection for machining task: accuracy/surface/speed
  DMG MORI NETSERVICE	DMG MORI NETSERVICE Qualified support by Internet-based remote diagnostics
  IoT connector	DMG MORI IoTconnector The IoTconnector allows the use of online services of DMG MORI (e.g. NETSERVICE or MESSENGER on ADAMOS)
  SERVICE AGENT (CELOS)	SERVICE AGENT (CELOS) Overview of all maintenance work on the machine
  MESSENGER (CELOS)	MESENGER (CELOS) Clear live status of the networked machines
  Special equipment	- Painting of the enclosure cooling units in machine colour - Tempered glass pane including cabin in FD design - Rotating viewing window for work area, 1 pc Bonded version for tempered glass panes - Narrow swivelling bridge with integrated Capto C8
  Special equipment	Wheel magazine for changing smaller workpieces workpieces by means of shuttle unit and double gripper workpiece changer into the work area. - Double wheel with 25 workpiece holders each (quiver) - Shuttle unit - Double gripper for workpiece handling - C

• State

  Used