Search filter
Search filter
Products
Provider
Category
Manufacturer
Products ()
Merchants ()
Manufacturers ()

DMP 70 (Reference-Nr. 051135)

Request about this Machine
Asking price


  • Reference number Reference number 051135
    Manufacture Year Manufacture Year 2023
    Operation Hours Operation Hours not applicable
  • Vendor

    DMG MORI Global Marketing GmbH
    Walter-Gropius-Str.7
    80807 München
    GermanyGermany
    Showroom Logo
  • Main Category

    Metal working machines
  • Category

    Machining centres
  • Type of Machine

    Machining Centers (Vertical)
  • Manufacturer

    DMG MORI
  • Control

    Siemens
  • Description


    General
    High dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate
    Working area 1
    Longitudinal 700 mm
    Cross 420 mm
    Vertical 380 mm
    Technical Data
    Feed rate longitudinal/transverse/vertical 60000/60000/60000 mm/min
    Rapid traverse longitudinal/transverse/vertical 60/60/60 m/min
  • Specification


    Main drive Drive power (100% DC) 6 kW
    Drive power (40% DC) 8,5 kW
    Torque (100% DC) 41 Nm
    Toolchanger toolchanger
    Clamping System ISO 7388-3 - JD30
    Spindle taper BT 30
    Speed range 20 - 15000 rpm
    Torque (40% DC) 48 Nm
    Type of magazine Disk
    Number of tools 25
    Integrated swivel rotary table simultaneous Integated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Rotary joint, 4-channels Inclusive Software package
    Production package band filter ICS 40bar Paper band filter ICS 40bar includes: Paper band filter 40bar/ 23l/min Additional tank 600l Chip conveyor useable for fine chips (self cleaning slotted filter) Discharge height: 600mm; Tank volume 200l Flushing in working room Spray gun for swarf removal
    Chip Trolley DMP, tiltable Chip Trolley DMP, tiltable suitable for Chip removal package with chip conveyor and Production package
    Air blast through spindle centre Air blast through spindle center via M-Command; maintained air with small Oil portion Due to needed lead through in main spindle only with swarf removal package ICS possible!
    Blum Efficiency package Blum Efficiency package suitable to milling spindle including: Touchprobe TC-52 Infrared Z-Nano cable connected, probe head mechanical for tool break control and length measuring Calibration bar with tool taper Messzyklen
    3D Quick SET 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
    MPC Machine Protection Control MPC Machine Protection Control Machine protection by quick shutdown
    Signal lamp 4-colour Signal lamp, 4 colours
    Standard Automation Interface right Automation interface right according to DECKEL MAHO Standard consisting of: Interface (Profibus) via M65; Automatic loading door right; Working table with 4-channel rotary joint; 4-chanel enegry supply to machine table for (3-Axis-Machines)
    Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
    DXF Reader DXF-Raeder: Open CAD files Extracting of counters and drilling positions directly in G-code and ShopMill programs Supported elements: drilling positions and contours
    ATC (Application Tuning Cycle) ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy/surface/speed
    Exhibition design DMP 70 Exhibition design chiller of electrical cabinet painted in electrical cabinet color; DMG-MORI set of labels; paper version of electrical plan
    Digital Manufacturing Package Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
    Messenger V4 The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
    DMG MORI Service Agent DMG MORI Service Agent Warning in advance - Service on time
    Workpiece loading & unloading system WH 3 CELL Workpiece loading & unloading system WH 3 CELL with 6-axis industrial robots and workpiece carrier storing system (paternoster); maximum possible workpiece weight of 3 kg, maximum workpiece size 100 x 100 x 50 mm Robot FANUC LR Mate 200 iD/7L PROFIBUS in
    Pneumatic pallet pusher - robot side Pneumatic cylinder installed on the robot side for slide over individual workpiece pallets within the paternoster system.
    Menu-driven input programming Menu-driven input programming Control extension in addition to the Teach programming; Process definition by entering parameters; Separate intuitive user interface;
    WH 3 CELL Integration kit for DMP 35/70 WH 3 CELL Integration kit for DMP 35/70 Machine-specific adaptation for the protective housing on one DMP 35/70
    Dual gripper PGN 80 (without gripper fingers) Dual gripper Type Schunk PGN 80 with 8 mm travel per jaw (gripper fingers not included!)
    Gripper adjustment system for 2 gripper Gripper adjustment system for dual gripper
    Workpiece carrier standard Workpiece carrier standard - plastic 15 Workpiece carrier 600x400 (workpiece specified inlay's not include)
    Robot Teachset Robot Teachset for the new creation of workpieces / workpiece carriers as well as for the basic adjustment of the robot and / or gripper.
    SPC drawer SPC drawer (only to be removed) Output of a trial workpiece for process control
    Turning station (without gripper fingers) Turning station includes 1 gripper, type depending on the selection and rotary module 0° / 180° (gripper fingers not included!)
    Not OK discharge via slide Not OK discharge via slide Removal of bad parts after machine signal
    Alignment station Alignment station for exact positioning of the workpiece in the gripper.
    Robot Teachset Robot Teachset for the new creation of workpieces / workpiece carriers as well as for the basic adjustment of the robot and / or gripper.
    Special equipment Exhibition design for WH 3 CELL, incl. enclosure cooler painted in enclosure colour, robot painted in painted in calcite white, DMG MORI sign set, Illumination of robot work area, Makrolon panes around Robot work area instead of Mesh panels incl. door Add
    Special equipment - 2 sets of gripper fingers designed for the DEMO workpiece standard gripper fingers - 3 sets of workpiece-specific inlays
  • State

    Used

Send request

More products from DMG MORI Global Marketing GmbH

Load