BA W04-22

•  
  Reference number 905820

  Manufacture Year 2021

  Operation Hours not applicable

• Vendor

  Wolfgang Finken GmbH
  Dornierstr. 20
  71706 Markgröningen

  Germany

  

• Main Category

  Metal working machines

• Category

  Machining centres

• Type of Machine

  Machining Centers (Horizontal)

• Manufacturer

  SW Schwäbische Werkzeugmaschinen

• Control

  Siemens 840 D solutionline

• Description

  SW Schwäbische Werkzeugmaschinen
  BA W04-22
  Double-spindle Machining Centre
  
  Create PDF Note Request
  GENERAL
  
  Project No.: 905820
  Quantity: 1 pc.
  Manufacturer: SW Schwäbische Werkzeugmaschinen
  Type: BA W04-22
  Control: Siemens 840 D solutionline
  New in: 2021
  Condition: Used Machine
  Maschine on approx. (hrs): 22949
  Spindle on approx. (hrs): 12802
  
  DESCRIPTION
  
  MILLING
  
  4Axis
  Travel in X 400 mm
  Travel in Y 500 (775) mm
  Travel in Z 425 mm
  Max. rapid traverse in X/Y/Z 100/100/100 m/min
  Max. acceleration in X/Y/Z 13/12/23 m/s2
  Feed force X/Y/Z 10000/10000/2x5000 N
  Linear glass scales X/Y/Z/A(U)/C1(C2)/W1(W2)
  Linear drive
  Two separate Z-Axis
  Tool taper HSK-A 63
  Max. speed milling spindle 17500 1/min
  Max. power at 10-40/100% duty ratio 35/26 kW
  Max. torque at 10-40/100% duty ratio 80/60 Nm
  Spindle diameter in front bearing 80 mm
  2 pc. Horizontal milling spindle
  Spindle distance 400 mm
  Air-monitored tool clamping
  Chain-type tool magazine 2x60 stations
  Max. tool diameter 80 mm
  Max. tool diameter without adjacent tools 160 mm
  Max. tool length 300 mm
  Max. workpiece weight 10 kg
  Chip-to-chip time 2,25 s
  Pallet changer 2 fold
  Max. workpiece weight per pallet 450 kg
  2 pc. Swivel unit for clamping bridge
  Swivel unit NC-controlled
  pcs. Preparation for Rotary table NC-controlled (5th axis)
  Bridge dimensions 1030 mm
  Workpiece swing diameter 550 mm
  2Clamping bridge supports
  Hydraulic clamping
  4 pcs. Additional clamping circuit
  Air-monitored clamping of workpiece
  
  FURTHER EQUIPMENT
  
  IR-measuring probe
  Tool breakage control
  Tool life time monitoring
  Fully enclosed work area
  Automatic sliding door for loading area
  Light in working area
  Oil-/emulsion mist extraction unit
  Scraper-type chip conveyor
  Machine operates/operated with emulsion
  Internal coolant supply
  Coolant unit with paperband filter
  High pressure pump 70 bar
  Modem for remote diagnosis and TeleService
  Tapping without compensation chuck
  Warning lamp
  
  GENERAL TECHNICAL DATA
  
  Air supply 6 bar
  Operating voltage 3x400/50 V/Hz
  Total power requirement 133 kVA
  Transport dimensions of the machine (LxWxH) approx. 3230x5100x3050 mm
  Space requirement of the whole equipement (LxWxH) approx. 4350x7000x3100 mm
  Machine weight approx. 14500 kg
  
  REMARKS
  
  This machine is a double-spindle horizontal machining centre, pallet changer and 4-axis-design (with preparation for a 5-axis rotary table on one side). All axis’ are driven by linear motors. It is particularly suitable for processing non-magnetic materials.
  
  Due to its young age and thus low production time, the machine is in perfect condition!
  
  We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

• State

  Used