Search filter
Search filter
Products
Provider
Category
Manufacturer
Products ()
Merchants ()
Manufacturers ()

HSC 75 linear (Reference-Nr. 055088)

Request about this Machine
Asking price


  • Reference number Reference number 055088
    Manufacture Year Manufacture Year 2023
    Operation Hours Operation Hours not applicable
  • Vendor

    DMG MORI Global Marketing GmbH
    Walter-Gropius-Str.7
    80807 München
    GermanyGermany
    Showroom Logo
  • Main Category

    Metal working machines
  • Category

    Machining centres
  • Type of Machine

    High Speed Machining Centers (HSC)
  • Manufacturer

    DMG MORI
  • Control

    Heidenhain
  • Description


    Technical Data
    Spindle taper HSK-A 63
    Feed rate longitudinal/transverse/vertical 1-90000/1-90000/1-90000 mm/min
    Rapid traverse longitudinal/transverse/vertical 90/90/90 m/min
    General
    HSC-Precision Centre - Active chiller for main spindle and linear drives - Active chiller for electrical cabinet - Direct absolute measuring system with air purge - scraper-type chip-conveyor and bed-flushing; Control: 3D-control Heidenhain iTNC 530 HSCI
    Working area 1
    Longitudinal 750 mm
    Cross 600 mm
    Vertical 560 mm
    Tool changer
    Application Vertical
    Type of magazine Wheel
    Type of gripper Pick up
    Number of tools 30
    Floor space/Weight
    Weight approx. 12000 Kg
    Dimensions (L x W x H) 6,65 x 7,6 x 3,18 m
  • Specification


    Splash guard equipment/cabin Splash guard equipment/cabin with illumination and sliding doors on operators side and front side
    Motor spindle with HSK-A 63 Drive power (100% DC) 25 kW
    Drive power (40% DC) 35 kW
    Speed range - 18.000 rpm
    Spindle taper HSK-A 63
    HSC75 linear 5-Axis Specification HSC 75 linear 5-Axis Specification clamping area Ø 750 mm, Ø 29.52 inch Tilting range B-axis +10/-110°; C-axis 360° Table load max. 800kg / 1763 lbs Absolute Measuring systems incl. permanent cooling of B- and C-axis motor
    Production package for high swarf volume with ICS Production package for high swarf volume ICS with paper type filter 40 bar / 23 l/min / 980-l tank / 580 psi/ 6 gallon/min / 258.9 gallon incl. swarf conveyor, scraper type with wedge wire screen extended swarf flushing, rotating clear view window coolan
    Monitoring lamp, 4 colours Monitoring lamp, four colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
    Application Tuning Cycle ATC-Software Application Tuning Cycle ATC-Software Selection of the optimal milling mode for the next machining-step
    3D Quick SET 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations (only with option touch probe)
    Tool laser measuring Renishaw Laser tool measuring Renishaw for tool length and diameter including calibration tool
    Internal air blast cooling Air blast cooling through the centre of spindle, selectable by M-function or soft key
    Oil and Emulsion Mist Separator Oil- and emulsion mist separator capacity 600m³/h, 0.5kW respective 21,189ft³/h, 0.7hp
    DMG MORI Netservice - client DMG MORI Netservice - client Qualified support by Internet-based remote diagnostics Will be installed on an external PC!
  • State

    Used

Send request

More products from DMG MORI Global Marketing GmbH

Load