Search filter
Search filter
Products
Provider
Category
Manufacturer
Products ()
Merchants ()
Manufacturers ()

TECHNIKA ZSM 5100-2000

Request about this Machine
Asking price


  • Reference number Reference number 1049-751968
    Manufacture Year Manufacture Year 1975
    Operation Hours Operation Hours not applicable
  • Vendor

    Hans-Jürgen Geiger Maschinen-Vertrieb GmbH
    James-Watt-Str. 12
    72555 Metzingen
    GermanyGermany
    Showroom Logo
  • Main Category

    Metal working machines
  • Category

    Drilling machines
  • Type of Machine

    Centre drilling machines
  • Manufacturer

    TECHNIKA
  • Technical data

    workpiece diameter
    125 mm
    grinding depth
    50 mm
    clamping length
    2000 mm
    total power requirement
    0,5 kW
    weight of the machine ca.
    1000 kg
    dimensions of the machine ca.
    m
  • Description

    T E C H N I C A (Switzerland)
    Centre Hole Grinding Machine
    Model ZSM 5100 – 2.000
    Year approx.. 1975 S/N 66 32 7872 – J 3278
    _______________________________________________________

    Distance between centres 50 – 2.000 mm
    Height of centres approx. 125 mm
    Workpiece Ø in clamping Vice 8 – 125 mm
    Swing of workpiece over tailstockguide 290 mm
    Swing of Workpiece max. over grinding head pillar 300 mm
    Max.weight of workpiece 250 kg

    Max. centre hole taper Ø 2 – 50 mm
    Max. centre hole taper angle 60 °

    Clamping range of vice approx. 5 – 160 mm

    Grinding head adjustable in vertical axis 160 mm
    Stroke of grinding tool on workpiece 0.75 – 5 mm

    Grinding tool Ø 15 – 60 mm
    Grinding spindle speeds 13,000 – 45,000 rpm

    Total electrical load, approx. 1 kW - 380 V - 50 Hz
    Weight, approx. 1.000 kg

    Accessories / Special Features
    Machine is suitable for workpiece length up to 2.000 mm
    with a basement extension
    * A cone shaped grinding wheel is employed, but it is only in line contact
    with the centrehole surface, in addition it is reciprocating
    simultaneously along this line.
    The workpiece remains stationary, enabling the generation of perfect
    centre holes.
    * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw vice
    which gives three point contact and always coincides with the center of
    the grinding spindle.
    * Height-adjustable workpiece centering vice with carbide inserts.
    Manual adjustment of appropriate workpiece diameter with clamping screw.
    * Dressing device, mounted on the side of the grinding spindle, stroke
    approx. 40 mm, for producing a geometrically exact conical form and with
    oscillation of diamond tool.
    * Pre-centering device for Workpiece adjustment between centers.
    * Pneumatic Oil Lubrification of grinding spindle by oil-mist.
    * Manually adjustable Tailstock with handwheel but without motorized drive.

    Condition : Good to very good. Machine can be inspected under power.
    Delivery : Ex stock, as inspected
    Payment : Net, after conclusion of contract




    This ad was created with MODUL MWS - the software solution of LogoTech.
  • State

    Used

Send request

More products from Hans-Jürgen Geiger Maschinen-Vertrieb GmbH

Load