DMF 300|11 (Reference-Nr. 030326)

•  
  Reference number 030326

  Manufacture Year 2023

  Operation Hours not applicable

• Vendor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

  Metal working machines

• Category

  Milling machines

• Type of Machine

  Bed milling machines (moving column)

• Manufacturer

  DMG MORI

• Control

  Siemens

• Description

  
  

  General
  Travelling column machine; Control: CELOS with Siemens 840D sl Operate
  Working area 1
  Longitudinal	3000 mm
  Cross	1100 mm
  Vertical	1050 mm
  Feed drives:
  Feed rate X / Y / Z	80000/80000/80000 mm/min
  Rapid feed X / Y / Z	80/80/80 m/min

• Specification

  
  

  NC-swivel head (B-axis)	Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 / 1,696 ft
  Dynamic package for DMF 300|11 linear	Dynamic package for DMF 300|11 linear Linear motor X-axis with 80 m/min // 262.48 ft/min Rapid speed XYZ 80 m/min // 262.48 ft/min Acceleration XYZ 8 m/s² // 26.25 ft/s² Active cooling for Linear motor
  Package Mill / Turn 12,000 rpm, HSK-A100	Package Mill / Turn, 12,000 rpm HSK-A100 (Only available for Siemens 840D solutionline) NC-Mill-Turn-table d 1,050 mm / 41.3 in (left) C-axis direct drive, speed max. 700 rpm Integrated balancing system Milling spindle power 44/32 kW (40/100% ED) tool hol
  Cabine	Full protection cabin
  NC-subtable 700-1, A-axis, left working area	NC-sub table 700-1 (A-axis) Left working area
  Removable partition wall DMF |11	Partition wall removable for pendulum machining, 2 working spaces
  Internal Coolant Supply 80bar/980l frequency controlled	Internal coolant supply (ICS) with paper type filter Papertype-Filter 20-80 Bar // 290-1160 psi frequenzy controlled 980 l tank // 258.8 gallon inclusive 2 rotating clear window, air purge for linear measuring system, rotary joint for main spindle
  Coolant tempering for internal coolant 980l	Coolant tempering for internal coolant unit 980l / 259 gallon: Heating capacity max.: 4 kW / 5.3 hp Cooling capacity max.: 4 kW / 5.3 hp (only in combination with internal coolant unit 980l)
  Chip flushing for working area	Flushing for working area Additional flushing of the working area doors and cabin sidewalls, Bed flushing included (only available starting internal coolant supply 980l)
  Air blast through spindle centre	Air blast through spindle centre activated by M function, maintained air, low oil rate possible
  Swarf conveyor, apron conveyor	Swarf conveyor,type apron conveyor recommended for large swarf and thread chips
  Oil mist separator (with partition wall)	Oil and emulsion mist separator system 2 pieces per machine implemented in right and left cabin side wall. mechanical filter system 2x1600 m³/h
  Infrared measuring probe PP60 optical	Infrared touch Probe for ISO 50 make Renishaw PP 60 optical (OMP 60) Tool taper suitable for the spindle
  Combi-Tool measuring	Combi - Tool measuring Blum LaserControl LC52 DIGILOG Laser-System for milling tools 3D-probe for turning tools
  3D quickSET elevated constructuion	3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations include additional fixture for elevated construction (only with option touch probe)
  Sensor package i4.0	Sensor package i4.0: MPC Machine Protection Control SGS Spindle Growth Sensor ICS flow sensor
  Door drive for working area doors	Door drive for working area doors Open / close - activated by two-hand-operation at the control panel Safety sensor technology for prevention of accidents
  Signal lamp 4-colour	Signal lamp, 4 colours
  ATC (Application Tuning Cycle)	ATC (Application Tuning Cycle) programmable feed parameter selection for machining task: accuracy/surface/speed
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Service Agent	Service Agent Overview of all maintenance work on the machine
  Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
  Special equipment	- Tool magazine 30 places SK50/HSK-A100 Chain magazine with double gripper - Additional control panel at tool input station Mirrored tool list (control panel) - Adaptive coolant supply Automatic optimisation and control of the ICS flow rate depe
  Special equipment	Control system is equipped with CELOS X and ErgoLineIV control panel with 24 screen

• State

  Used