Search filter
Search filter
Products
Provider
Category
Manufacturer
Products ()
Merchants ()
Manufacturers ()

DMF 260|11 (Reference-Nr. 030321)

Request about this Machine
Asking price


  • Reference number Reference number 030321
    Manufacture Year Manufacture Year 2023
    Operation Hours Operation Hours not applicable
  • Vendor

    DMG MORI Global Marketing GmbH
    Walter-Gropius-Str.7
    80807 München
    GermanyGermany
    Showroom Logo
  • Main Category

    Metal working machines
  • Category

    Milling machines
  • Type of Machine

    Bed milling machines (moving column)
  • Manufacturer

    DMG MORI
  • Control

    Siemens
  • Description


    General
    in travelling column construction NEW DMG MORI Design swivel head (B-axis) tool clamping according to DIN 69872; Control: CELOS with Siemens 840D sl Operate
    Working area 1
    Longitudinal 2600 mm
    Cross 1100 mm
    Vertical 900 mm
    Technical Data
    Feed rate longitudinal/transverse/vertical 40000/40000/40000 mm/min
    Rapid traverse longitudinal/transverse/vertical 80/60/60 m/min
    Tool changer
    Type of magazine Chain
    Type of gripper Double gripper
    Number of tools 60
    Max. tool weight 15 Kg
    Max. tool length 500 mm
    Max. tool diameter with occupied adjacent pockets 115 mm
    Max. tool dia. with free neighbouring pockets 160 mm
  • Specification


    Direct measuring system Direct path measuring system
    Cabine Full protection cabin
    Dynamic package for DMF 260 linear (Y1100) Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // 262.48 ft/min rapid move XYZ 80/60/60 m/min // 262.48/196.86 ft/min, Acceleration XYZ 5/6/6 m/s² // 16.4/19.68 ft/s² Active chiller for main spindle and Linear motor mag
    Rigid table with integrated rotary axis (leftside) Rigid table with integrated round table d 1050 mm // 41.3 in, located in the left working area table load max. 1,200 kg// 2,644 lbs hydraulic clamped in position
    Table surface 3200 x 1100 (Ø 1050) mm
    Slot width 18 mm
    Distance between T-Slots 100 mm
    Number of Slots 9
    Rotation speed max.4. Axis 50 rpm
    Removable partition wall DMF260 (Y1100) Partition wall removable for pendulum machining DMF260, 2 working spaces (possible with integrated round table)
    Tool magazine 60 positions Tool magazine with 60 positions, chain type with double gripper
    Spindle speed 20 - 10,000 rpm Spindle speed 20 - 10,000 rpm HSK-A100 for tool taper according to DIN69893 with power 44/32 kW // 59.0/42.9 hp with torque 288/187 Nm (40/100% ED)
    3D quickSET elevated constructuion 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations include additional fixture for elevated construction (only with option touch probe)
    Oil mist separator Oil and emulsion mist separator system 2 pieces per machine implemented in right and left cabin side wall. mechanical filter system 2x1600 m³/h
    Signal lamp 4-colour Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
    Air blast through spindle centre Air blast through spindle centre activated by M function, maintained air, low oil rate possible
    Inner coolant supply 40Bar/980l Internal coolant supply (ICS) with paper type filter 40 Bar/980 l // 580 psi/258.8 gallon inclusive 2 rotating clear window, air purge for linear measuring system, rotary joint for main spindle
    Chip flushing for working area Flushing for working area Additional flushing of the working area doors and cabin sidewalls, Bed flushing included
    Door drive for working area doors Door drive for working area doors Open / close - activated by two-hand-operation at the control panel Safety sensor technology for prevention of accidents
    MPC Machine Protection Control MPC Machine Protection Control Machine protection by quick shutdown
    Application Tuning Cycle ATC Application Tuning Cycle ATC programmable feed parameter selection for machining task: accuracy/surface/speed
    Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
    Digital Manufacturing Package Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
    Messenger V4 The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
    Service Agent Service Agent Overview of all maintenance work on the machine
  • State

    Used

Send request

More products from DMG MORI Global Marketing GmbH

Load