Search filter
Search filter
Products
Provider
Category
Manufacturer
Products ()
Merchants ()
Manufacturers ()

DMF 260|11 (Reference-Nr. 030318)

Request about this Machine
Asking price


  • Reference number Reference number 030318
    Manufacture Year Manufacture Year 2023
    Operation Hours Operation Hours not applicable
  • Vendor

    DMG MORI Global Marketing GmbH
    Walter-Gropius-Str.7
    80807 München
    GermanyGermany
    Showroom Logo
  • Main Category

    Metal working machines
  • Category

    Milling machines
  • Type of Machine

    Bed milling machines (moving column)
  • Manufacturer

    DMG MORI
  • Control

    Siemens
  • Description


    General
    in travelling column construction NEW DMG MORI Design swivel head (B-axis) speed range 20 up to 10,000 rpm motor spindle with 52/42 kW (40/100%DC) tool taper HSK-A100 DIN 69893 tool clamping according to DIN 69872; Control: CELOS with Siemens 840D sl Operate
    Working area 1
    Longitudinal 2600 mm
    Cross 1100 mm
    Vertical 900 mm
    Technical Data
    Feed rate longitudinal/transverse/vertical 80000/80000/80000 mm/min
    Rapid traverse longitudinal/transverse/vertical 80/80/80 m/min
    Tool changer
    Type of magazine Chain
    Type of gripper Double gripper
    Number of tools 60
    Max. tool length 500 mm
    Max. tool weight 12 Kg
    Max. tool diameter with occupied adjacent pockets 115 mm
    Max. tool dia. with free neighbouring pockets 160 mm
  • Specification


    Direct measuring system Direct path measuring system
    Cabine Full protection cabin
    Dynamic package for DMF 260 linear (Y1100) Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // 262.48 ft/min rapid move XYZ 80/60/60 m/min // 262.48/196.86 ft/min, Acceleration XYZ 5/6/6 m/s² // 16.4/19.68 ft/s² Active chiller for main spindle and Linear motor mag
    Rigid table with integrated rotary axis (leftside) Rigid table with integrated round table d 1050 mm // 41.3 in, located in the left working area table load max. 1,200 kg// 2,644 lbs hydraulic clamped in position
    Table surface 3200 x 1100 (Ø 1050) mm
    Slot width 18 mm
    Number of Slots 11
    Clamping hydraulics,2 circuits,Rigid-/Round table Clamping hydraulic for rigid/integrated round table, 30-240 Bar, 2 circuits
    Rotation speed max.4. Axis 50 rpm
    Distance between T-Slots 100 mm
    Removable partition wall DMF260 (Y1100) Partition wall removable for pendulum machining DMF260, 2 working spaces (possible with integrated round table)
    Tool magazine 60 places SK50/HSK-A100 Tool magazine 60 places SK50/HSK-A100 Chain type with double gripper
    Mechanical setup station Mechanical setup station SK50/HSK-A100
    Load support for tool magazine Load support for tool magazine SK50/HSK-A100 with 2 pockets at the stairs to magazine
    Spindle speed 20 - 10,000 rpm HSK-A100 430 Nm Spindle speed 20 - 10,000 rpm HSK-A100 for tool taper according to DIN69893 with power 52/42 kW // 69.7/56.3 hp with torque 430/300 Nm (40/100% ED) (differently from standard)
    3D quickSET elevated constructuion 3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations include additional fixture for elevated construction (only with option touch probe)
    Tool laser measuring Blum Laser tool measuring Blum (not with TT 140 possible, for pendulum machining please order 2 pieces)
    Oil mist separator Oil and emulsion mist separator system 2 pieces per machine implemented in right and left cabin side wall. mechanical filter system 2x1600 m³/h
    Signal lamp 4-colour Signal lamp 4-colour Red: general error Yellow: intervention necessary Green: automatic mode Blue: set-up mode
    Air blast through spindle centre Air blast through spindle centre activated by M function, maintained air, low oil rate possible
    Internal Coolant Supply 80bar/980l frequency controled Internal coolant supply (ICS) with paper type filter Papertype-Filter 20-80 Bar // 290-1160 psi frequenzy controlled 980 l tank // 258.8 gallon inclusive 2 rotating clear window, air purge for linear measuring system, rotary joint for main spindle
    Chip flushing for working area Flushing for working area Additional flushing of the working area doors and cabin sidewalls, Bed flushing included
    Double cartridge filter,25 µm Double cartridge filter, Finesse of filtration 25 µm (only in combination with internal coolant)
    Coolant tempering for internal coolant 980l Coolant tempering for internal coolant unit 980l / 259 gallon: Heating capacity max.: 4 kW / 5.3 hp Cooling capacity max.: 4 kW / 5.3 hp (only in combination with internal coolant unit 980l)
    Door drive for working area doors Door drive for working area doors Open / close - activated by two-hand-operation at the control panel Safety sensor technology for prevention of accidents
    MPC Machine Protection Control MPC Machine Protection Control Machine protection by quick shutdown
    proTIME proTIME Visualisation of remaining runtime, remaining workpieces and the machine state
    Application Tuning Cycle ATC Application Tuning Cycle ATC programmable feed parameter selection for machining task: accuracy/surface/speed
    Operation mode 4 Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
    Turning/Milling cycle Turning / milling cycle For the machining of internal and external diameter using spindle orientation
    DXF Reader DXF-Raeder: Open CAD files Extracting of counters and drilling positions directly in G-code and ShopMill programs Supported elements: drilling positions and contours
    angularTOOL angular TOOL Technology cycle for programming of a 360 degree rotatable angular head tool
    Laminated safety glass Laminated safety glass for Windows in the two front doors
    Exhibition design DMF Exhibition design DMF chiller of electrical cabinet painted in electrical cabinet color; lighting of tool magazine; DMG-MORI set of labels; paper version of electrical plan
    Stop block HSK-100/SK50/CAT50 Stop block HSK-A100/SK50/CAT50
    Digital Manufacturing Package Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
    Messenger V4 The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
    Service Agent Service Agent Overview of all maintenance work on the machine
    Special equipment SK001 Preparation for Hofmann RW/NC 400 with direct measuring system ready to plug right workspace Y-0404 Micro-Aerator: For clean coolant (50HZ)
  • State

    Used

Send request

More products from DMG MORI Global Marketing GmbH

Load