DMF 200|8 (Reference-Nr. 030309)

•  
  Reference number 030309

  Manufacture Year 2023

  Operation Hours not applicable

• Vendor

  DMG MORI Global Marketing GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

  Metal working machines

• Category

  Milling machines

• Type of Machine

  Bed milling machines (moving column)

• Manufacturer

  DMG MORI

• Control

  Siemens

• Description

  
  

  General
  Traveling column machine; Control: CELOS with Siemens 840D sl Operate
  Technical Data
  Feed rate longitudinal/transverse/vertical	50000/50000/50000 mm/min
  Rapid traverse longitudinal/transverse/vertical	50/50/50 m/min
  Working area 1
  Longitudinal	2000 mm
  Cross	800 mm
  Vertical	850 mm
  Tool changer
  Number of tools	40
  Type of magazine	Chain
  Max. tool weight	6 Kg
  Max. tool length	400 mm
  Max. tool dia. with free neighbouring pockets	130 mm
  Max. tool diameter with occupied adjacent pockets	80 mm

• Specification

  
  

  Swivelhead, B-axis	Controlled NC swivel milling head 15,000 rpm (B-axis) with clamping in position Continuously positioning NC- swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel speed: 50 rpm Swivel range: ±12
  	Drive power (100% DC) 16 kW
  	Drive power (40% DC) 21 kW
  	Torque (100% DC) 85 Nm
  	Torque (40% DC) 111 Nm
  Rigid table with integrated rotary axis (centre)	Rigid table with integrated round table d 800 mm // 31.49 in located in the middle of table table load max. 800 kg // 1763 lbs
  	Clamping System DIN ISO 7388-3-A, AD
  	Spindle taper SK40 Tool holder DIN ISO 7388-1-A
  	Speed range 20 - 15000 rpm
  Direct measuring system	Direct path measuring system
  Cabine	Full protection cabin
  Spindle speed 15,000 rpm, 200Nm	Motor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)
  3D quickSET elevated constructuion	3D quickSET Tool kit for control and compensation of the cinematic accuracy of 5 axis machine configurations include additional fixture for elevated construction (only with option touch probe)
  Tool laser measuring Blum	Laser tool measuring Blum LC50 DIGILOG Measurement of length and diameter Automatic cleaning with external air blast Calibration Tool with tool holder (not with TT 140/160 possible, for pendulum machining, please order 2 pieces)
  Signal lamp 4-colour	Signal lamp, 4 colours
  Air blast through spindle centre	Air blast through spindle centre activated by M function, maintained air, low oil rate possible
  MPC Machine Protection Control	MPC Machine Protection Control Machine protection by quick shutdown
  Inner coolant supply 40Bar/980l	Internal coolant supply (ICS) with paper type filter 40 Bar/980 l // 580 psi/258.8 gallon inclusive 2 rotating clear window, air purge for linear measuring system, rotary joint for main spindle
  Bed flushing	Bettspülung Spüldüsen am hinteren Maschinenbett unterhalb der X- Lamellenwand und Rahmen Y-Z- Achse (nur möglich ab Innerer Kühlmittelzufuhr 980l)
  Mech. Prep. oil mist separator	Mechanical preparation for connection of an oil mist separator on customer side flange ø200mm above electric cabinet
  RTF Bezeichnung Gültig ab fester Serienbezug Letzte Änderung Geändert von Aktion Door drive for working area doors	Door drive for working area doors Open / close - activated by two-hand-operation at the control panel Safety sensor technology for prevention of accidents
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area. Release after check list has been filled in.
  Digital Manufacturing Package	Digital Manufacturing Package (1) IoTconnector Allows the use of the Online services from DMG MORI (2) Machine Data Connector (MDC) Standardized machine data interface Protocols: OPCUA, MTConnect, MQTT (3) NETservice Qualified support through internet-b
  Messenger V4	The latest version of DMG MORI Messenger displays web based the machine live status. It allows to analyze the machine run-time, downtime, alarms in individually configurable dashboards and transparently shows the actual status in the manufacturing shop
  Service Agent	Service Agent Overview of all maintenance work on the machine

• State

  Used