DMU 100 monoBLOCK (Reference-Nr. 011191)

•  
  Reference number 011191

  Manufacture Year 2013

  Operation Hours not applicable

• Vendor

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

  Metal working machines

• Category

  Machining centres

• Type of Machine

  Machining centres (Universal)

• Manufacturer

  DMG MORI

• Control

  Heidenhain

• Description

  
  

  General
  Universal milling machine in monoBLOCK construction; Control: 3D Control Heidenhain iTNC 530 HSCI
  Technical Data
  Feed rate longitudinal/transverse/vertical	30000/30000/30000 mm/min
  Rapid traverse longitudinal/transverse/vertical	30/30/30 m/min
  Working area 1
  Longitudinal	1150 mm
  Cross	710 mm
  Vertical	710 mm
  Tool changer
  Application	Vertical
  Tool changer plane	vertical
  Type of gripper	Pick up
  Number of tools	32
  Miscellaneous
  Clamping System	HSK-A 63
  Floor space/Weight
  Dimensions (L x W x H)	6,0 x 5,0 x 2,7 (7,0 x 5,5 x 3,5) m
  Weight approx.	10700 Kg

• Specification

  
  

  Direct measuring system	Direct path measuring system
  Cabine	Full protection cabin
  NC rotary table integrated in rigid table	Type of Measuring system Direct measuring system
  	Distance between T-Slots 63 mm
  	Number of Slots 11
  	Slot width 14 mm
  	Maximum load (table centre) 800 Kg
  	Centre bore 50 mm
  	Table surface 1500 x 800 (Ø 800) mm
  	Rotation speed max.4. Axis 30 rpm
  	4. Axes (swivelling range) +/- 360/000,1 degree
  Motor spindle 10,000 rpm	Motor spindle SK 40 10,000 rpm
  	Drive power (100% DC) 20 kW
  	Drive power (40% DC) 30 kW
  	Torque (100% DC) 190 Nm
  	Torque (40% DC) 285 Nm
  	Speed range - 10000 rpm
  	Spindle taper SK 40 DIN 69871
  Controlled NC swivel milling head (B-axis)	Controlled NC swivel milling head (B-axis) incl. hydraulic clamping Spindle offset 100 mm / 4 in Swivel range -120°/+30° Traverse range X-axis reduced by 100 mm / 4 in
  Spindle taper HSK-A 63	Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle and standard magazine)
  MPC Machine Protection Control	MPC Machine Protection Control Machine protection by quick shutdown
  Production package 40bar/23l/min	Production package 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) tank 600 l / 160 gallon, paper band filter, rotating clear-view window, chip rinsing in cabin door, coolant through spindle centre (AD)
  Cooling	Cooling by air blast through spindle centre, selection with M function
  Oil and emulsion mist separator	Oil and emulsion mist separator Mechanical filter Throughput volume 1,100 m³/h
  Operation mode 4	Operation mode 4 Process monitoring in the production Manual intervention with open doors of machining area Release after completed check list
  Special equipment	RMS-Sensor

• State

  Used