CMX 50 U (Reference-Nr. 011182)

•  
  Reference number 011182

  Manufacture Year 2019

  Operation Hours not applicable

• Vendor

  DMG MORI EMEA Holding GmbH
  Walter-Gropius-Str.7
  80807 München

  Germany

  

• Main Category

  Metal working machines

• Category

  Machining centres

• Type of Machine

  Machining centres (Universal)

• Manufacturer

  DMG MORI

• Control

  Heidenhain

• Description

  
  

  General
  Universal Milling Machines; Control: 3D-control Heidenhain TNC 620
  Working area 1
  Longitudinal	500 mm
  Cross	450 mm
  Vertical	400 mm
  Technical Data
  Feed rate longitudinal/transverse/vertical	30000/30000/30000 mm/min
  Rapid traverse longitudinal/transverse/vertical	30/30/30 m/min
  Floor space/Weight
  Dimensions (L x W x H)	3,15 x 2,86 x 2,71 (4,14 x 2,91 x 2,71) m
  Weight approx.	4700 Kg

• Specification

  
  

  Swivel Rotary Table Powered B/C Axes	Swivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!
  	Type of Measuring system Direct measuring system
  	Table surface Ø 630 x 500 mm
  Main drive	Type of main drive AC
  	5. Axes (swivelling range) -5/+110 x 0,001 degree
  	4. Axes (swivelling range) 360 x 0,001 degree
  	Distance between T-Slots 63 mm
  	Number of Slots 7
  	Slot width 14 mm
  	Maximum load (table centre) 200 Kg
  Tool magazine	Application Vertical
  	Clamping System DIN 69872
  	Spindle taper SK 40 DIN 69871
  	Speed range 20 - 12000 rpm
  	Drive power (40% DC) 13 kW
  	Drive power (100% DC) 9 kW
  	Type of magazine Chain
  	Type of gripper Double gripper
  	Number of tools 30
  Direct measuring system X,Y,Z	Direct Measuring System X, Y, Z inclusive Air Purge for Measuring System
  Air coolant internal (through spindle centre)	Air Coolant Internal (through spindle centre) switchable via M-Function maintained air with low oil rate
  Renishaw Touch Probe-Kit for HEIDENHAIN control	Renishaw Touch Probe-Kit for HEIDENHAIN control Option includes: - PP40 Touch probe with optical signal transmission; - TS27R Probe for tool measurement; - Calibration tool; - Calibration ring; - Case for equipment.
  Preparation 3D quickSET	Machine Preparation for use of the 3D quickSET Toolkit. Option included software for 3D quickSET for one machine (only with option Touch Probe)
  Production Package 1 with Chip Conveyor	Production Package 1 Option includes: - Internal coolant supply 12 bar; - Chip conveyor (scraper type) with tank capacity: 250 l (left) - Bed and ATC arm flushing via M-Function; - Coolant spray gun for swarf removal - External electronic handwheel - Ca
  Software option 3 (Option number #21)	Software Option 3 (Option number #21) Tool compensation M120: Radius-compensated contour look-ahead for up to 99 blocks 3D - machining M118: Superimpose handwheel positioning during program run For HEIDENHAIN control

• State

  Used